When the linear guide slider is damaged, is it repaired or replaced directly?

In most modern equipment, there are a large number of linear guide slider, which is the use of the slider in the linear guide to do the principle of reciprocating motion, although the overall trajectory is fixed, and there will be lubricating oil, but Due to the different use of the environment, the slider itself will have a certain life problem. Therefore, if the linear guide slider is damaged, is it repaired or replaced directly?

1. What are the main problems of the slider

Due to the large differences in equipment, environment, etc., it cannot be said that the same or similar faults will occur during the use of the slider, but in general, these faults or problems can be divided into two parts, the 1 is the slider motor component part, the 2 is the guide rail part. In the slider motor element, there are a variety of small parts such as motors, springs, gears, etc., which are prone to problems; in the guide rail part, for example, it may cause failure due to rust, deformation, etc.

2. Choose to repair or replace

Generally speaking, since most sliders are not large in size and various parts are integrated and installed inside, if one or several parts have problems, they can be repaired at a professional maintenance point, but if it is a key part, the maintenance cost may be about the same as that of a new one. In most cases, if there is no problem with the guide rail, you can directly replace the new slider, which is simple and convenient, and the cost will not be too high.

3. If it is replaced, is the slider price high?

Sliders for different equipment, there is also a big difference in price, such as the slider for injection molding machine basically 10-20 yuan can be done, and the price of the slider on the engraving machine is very high.

For linear guide rail, if you have other questions or problems, you can contact us at any time (Xianyang weilixin Machinery Co. Ltd.), telephone number: +86-29-33370191 18089115989